1/10 SENTON 4WD V3 3S BLX Brushless Short Course Truck RTR, Blue

3.5 out of 5 Customer Rating
ARRMA #ARA4303V3T1
Earn points on this item
In Stock
Selected Store
color:
 
| Checkout out our products at a store near you.
Product Logo
Extreme toughness and 50+ MPH speed separate the SENTON™ 4X4 3S BLX Short Course model from the pack. It’s now better than ever, with a Spektrum™ SLT3™ radio, Firma™ brushless motor, tougher chassis, more powerful steering servo and other upgrades.
  • Stronger chassis and retained hinge pin plate
  • Steering with more clearance for stones
  • Castellated slipper pad and sliding gear mesh
  • Plastic locknut for slipper
  • Ready to Run (RTR) completion level is fully assembled and includes everything needed besides batteries and a charger.
  • (1) ARRMA® SENTON™ 4X4 3S BLX 1/10 Scale 4WD Electric Short Course Truck RTR
  • (1) BLX100 2S/3S Waterproof* ESC
  • (1) Spektrum™ Firma™ 3660 3200Kv Brushless Motor
  • (1) Spektrum™ 2.4GHz SLT3™ 3-Channel Transmitter
  • (1) Spektrum™ SLR300 Receiver
  • (1) Spektrum™ SPMS651 Waterproof* Metal-Geared Digital Servo
  • (1) 1/10 SENTON 4WD V3 3S BLX Manual
  • (1) 2-3S LiPo Battery with EC5™ or IC5™ connector
  • (1) Compatible Battery Charger
  • (4) AA batteries for Transmitter
Help
Need Help
1/10 SENTON 4WD V3 3S BLX Brushless Short Course Truck RTR, Blue

Features

  • Stronger chassis and retained hinge pin plates
  • Steering with more clearance for stones
  • Castellated slipper pad and sliding gear mesh
  • Plastic locknut for slipper
  • 23T Spline servo saver
  • 37T 1.35Mod diffs with silicone O-rings
  • Power Module with sliding gear mesh and improved dirt management
  • Rubber shielded bearings throughout
  • Oil-filled shocks with silicone O-rings
  • Front and rear bumpers
  • Tough gunmetal colored multi-spoke wheels
  • Vented multi-terrain dBoots® Fortress™ SC tires
  • BLX100 2S/3S waterproof* ESC
    *For details on waterproof standards, refer to the instruction manual.
  • IC5™ connectors (EC5™) compatible
  • Signature easy-access modular design
    • Easy-access power module
    • Easy-access electronics module
    • Easy-access diff module removal front and rear
  • Double wishbone suspension front and rear
  • Metal-geared differentials
  • Extended height dirt defenders
  • Adjustable ride height
  • Adjustable body mounts
  • Adjustable turnbuckles
  • High-speed center driveshaft support
  • Wheelie bar
  • 2-year limited warranty (see website for details)
  • 50+ MPH (80+ km/h) speed achievable in optimum driving conditions on 3S LiPo

Overview

Extreme toughness and outrageous 50+ MPH speed separate the 1/10 scale, ready-to-run SENTON™ 4X4 3S BLX Short Course model from rest of the pack. Precision aluminum, tough steel and composite materials come together for an easy-to-maintain, super-durable vehicle design that’s now been upgraded to further increase the original Short Course truck’s already impressive performance and durability.

The SENTON™ 4X4 3S BLX RTR is DESIGNED FAST, DESIGNED TOUGH — built for exciting bashing speeds and extreme, all-terrain durability. New features that enhance its unstoppable performance include a stronger chassis and retained hinge pin plates; steering with more clearance for stones; a castellated slipper pad and sliding gear mesh; and rubber-shielded bearings throughout.

It also now includes a Spektrum™ SLT3™ transmitter and SLR300 receiver. The transmitter is ergonomically designed for long periods of fatigue-free bashing and has a foam wheel for precise fingertip control, plus an improved hand grip and trigger feel. New bashers will be able to set throttle limits at 50% or 75% until they are ready to use the full speed potential. The SLT3™ is compatible with Tactic® SLT™ receivers to run other RTR vehicles you may own, and includes a third channel to control optional features such as lights and winches on models that have them.

ARRMA® now powers the SENTON™ 4X4 3S BLX with a brushless system featuring its BLX100 ESC and the Spektrum™ Firma™ 3200Kv brushless motor. The combination provides incredible torque, acceleration and speed. The transmission and chassis are ruggedly engineered to take full advantage of the electronics’ power.

It has the ingenious modular design perfected by ARRMA® engineers for easy component access and maintenance. The power module, with improved dirt management, consists of the motor with ARRMA® heatsink and cooling fan, plus motor plate, slipper clutch assembly and gear cover. The power module can be detached from the chassis as a complete unit by removing just one screw. With the power module removed, the slipper clutch can be reached easily for adjustments by taking out three screws that attach the gear cover. The gear ratio can be finely tuned as the power module now uses a sliding motor mesh design.

A two-piece molding screwed to the truck’s chassis serves as its electronics module, containing a waterproof receiver box, servo mount and ESC tray. The SLR300 receiver mounts inside the receiver box for protection from dirt and moisture. The ultra-compact ESC is screwed to the top of the module, allowing quick access to the on/off switch, while the servo mounts to the side. All three components can be removed together, quickly and easily.

The differential module houses each differential unit in an innovative yoke design. Only eight screws need to be removed to release the front and rear yokes. The power module can then be detached, allowing you to pivot the gearbox cases for differential access. The SENTON™ 4X4 3S BLX RTR comes brushless-ready with 37T 1.35mod diffs with silicone O-rings. The large gears can withstand huge torque, and internal metal gears have been chosen for reliability during extreme bashing.

Its full-time 4WD transmission uses strong front, rear, and centerline telescopic driveshafts that can’t be lost during heavy impacts, unlike dogbones. A simple, dependable, responsive steering assembly complements the ultra-reliable drive system and features a servo horn with built-in servo saver. The SENTON™ 4X4 3S BLX RTR includes the waterproof Spektrum™ SPMS651 metal-geared digital servo for 15% more torque than the previous version’s ADS-7M servo.

The self-bleeding, oil-filled shocks, now with silicone O-rings, use a tried and tested, coil-over design for simple maintenance and amazing handling. Their innovative rod-end has a molded-in spring perch for extra toughness. Extended height dirt defenders and a close-fitting body limit the amount of dirt and debris that can get into the chassis tub. Front and rear bumpers offer defense against impacts.

Tough gunmetal colored, multi-spoke wheels with vented dBoots® Fortress™ SC tires give the 1/10 scale SENTON™ 4X4 3S BLX RTR Short Course Truck effective traction for bashing on almost any terrain. The aggressively styled Short Course truck body — available in blue/black or red /black— looks great in action and even better up-close, where the attention to detail on the decal and body aesthetics really shines.

Video Overview

 

Spektrum 3-Channel SLT3 2.4GHz radio and SLR300 Waterproof* Receiver
Spektrum™ 3-Channel SLT3™ 2.4GHz radio and SLR300 Waterproof* Receiver

  • Fast response SLT™ protocol
  • Foam wheel
  • Improved grip and trigger feel
  • Improved wheel and trigger force
  • 2-way thumb switch third channel
  • 50% and 75% Throttle mode (for beginners)
  • Tactic® SLT™ receiver compatible

 

Spektrum SPMS651 Metal-Geared Digital Servo
Spektrum™ SPMS651 Metal-Geared Digital Servo

  • 101 oz-in (7.27 kg-cm) @ 6V
  • 15% more torque than the previous ADS-7M servo for improved steering feel
  • Waterproof*
  • *For details on waterproof standards, refer to the instruction manual.

 

Spektrum Firma 3660 3200Kv brushless motor with Safe D pinion and ARRMA heatsink and cooling fan
Spektrum™ Firma™ 3660 3200Kv brushless motor with Safe D pinion and ARRMA® heatsink and cooling fan

 

Strengthened Chassis
Strengthened Chassis

Stronger chassis and retained hinge pin plates

 

Larger pull tab on power module
Larger pull tab on power module

 

Castellated slipper pad and sliding gear mesh
Castellated slipper pad and sliding gear mesh

 

Rubber shielded bearings
Rubber shielded bearings

 

Redesigned Steering
Redesigned Steering

Steering with more clearance for stones.

 

Tougher brushless ready transmission
Tougher brushless ready transmission

Metal input spline moulded into composite gear. Same gears as the ARRMA 4S.

 

Sealed Wheels & Vented Tires
Sealed Wheels & Vented Tires

Stops dirt getting in and allows water to escape.

 

dBoots Fortress SC tires
dBoots® Fortress™ SC tires

Tough gunmetal colored, multi-spoke wheels with vented dBoots® Fortress™ SC tires give the 1/10 scale SENTON™ 4X4 3S BLX RTR Short Course Truck effective traction for bashing on almost any terrain.

 

Silicone O-rings
Silicone O-rings

Oil-filled shocks with silicone O-rings

 

Heavy Duty Bumpers
Heavy Duty Bumpers

 

Proven Power Package
Proven Power Package

Amazing power and performance.

 

Easy-access power module
Easy-access power module

  • Detaches from chassis as a complete unit by removing one screw.
  • Contains motor, motor plate, slipper clutch assembly and gear cover.

 

Easy-access electronics module
Easy-access electronics module

  • Two-piece molding screwed to the chassis contains a waterproof receiver box, servo mount, and ESC tray.
  • Receiver mounts inside sealed module for protection from dirt and moisture.
  • ESC screws to the top for easy maintenance and switch access.
  • Servo mounts on the side for quick servicing.

 

Metal-geared differentials
Metal-geared differentials

  • Large gears can withstand huge torque, and internal metal gears have been chosen for reliability during extreme bashing.
  • Easy-access front and rear diff module removal.

 

Proven tough composite shock towers
Proven tough composite shock towers

 

Product Specifications

Gear Pitch
0.8MOD
Servos
Included
Product Weight
6.05
Tire Tread
dBoots Fortress
Vehicle Type
Short Course Truck
Water-Resistant
Yes
Power Type
Electric
Ball Bearings
Full Ball Bearing Drivetrain
Chassis
Molded Composite
Completion Level
Ready-To-Run
Drivetrain
4WD
Scale
1/10
Approximate Assembly Time
No assembly required
Body
Painted, decalled and trimmed
Pinion
20T
Top Speed
50+
Product Height
8.27" (210 mm)
Battery
Sold Separately
Connector Type
IC5, EC5
Ground Clearance
1.26 in (32mm)
Internal Gear Ratio
2.85
Product Length
21.97" (558 mm)
Spur Gear
57T
Steering Type
2WS
Suspension
Independent
Product Width
12.01" (305 mm)
Radio
Included
Technology
SLT Protocol
Final Drive Ratio
8.12
Motor Type
Brushless
Rear Track
11.73 in (298mm)
Speed Control
Included
Wheelbase
12.87 in (327mm)
Bushing Material
Plastic
Charger
Sold Separately
Differential
2 Gear Diffs
Receiver
Included
Shock Type
Oil-Filled, Coil-Over Springs
Front Track
11.73 in (298mm)
Power System
3S
Wheel Hex Size
14mm